Advertisement
V
ECTOR
3
Time Programming
3.1 Clock Operation
Overview
This section gives an overview of the clock and the available timed functions of the device.
Note on Accuracy
Warning: Devices with a "D" addition (e.g. TCY-BH-D) have a real-time clock. This clock is accurate to two seconds
a day.
Time Programs
Up to 4 time and weekday programs can be programmed (Pro1 to Pro4). Each of the time programs support up to 4
switching events. A switching event can change the operating mode of the controller.
Devices with a "D" addition (e.g. TCY-BH-D) have a real-time clock with a maintenance-free power backup.
A flashing clock
indicates that the time has not been set or that the device has been without power for more
than 48 hours. The time must be set for the schedules to work.
3.2 Clock Setting
3.2.1 Setting time and date of clock
Overview
This section describes how to set the time and date of the system clock.
Procedure
1.
Press the (
/
➔ SEL and PRO is displayed and the clock symbol flashes.
2.
Press the ( ) ( ) button to select the time display.
➔ SEL and the actual Time is displayed.
3.
Press the (
/
Minutes flashes: ( ) ( ) button for adjustment, (
save.
Hours flashes: ( ) ( ) button for adjustment, (
save.
Day of the week flashes: ( ) ( ) button for adjustment, (
button to save.
Note: Monday is day 1 of the week.
Press the (
) button (1x) to go back.
Doc: 70-00-0988A, 20220920
Subjects to alteration
O
PERATIONS
) button longer than 3 seconds.
) button briefly to start changing the time and date:
© Vector Controls GmbH, Switzerland
www.vectorcontrols.com
M
T
P
ANUAL
IME
ROGRAMING FOR
Set Minutes
/
) button to
/
) button to
/
)
Set Day of Week
TCY-BH
Set Hours
Page 3-6
Advertisement
