Advertisement
V
ECTOR
3.3 Set Time Schedules
Overview
Up to 4 individual time programs can be programmed (Pro1 to Pro4).
Each of the time programs support up to 4 switching events.
A switching event can change the operating mode of the controller.
3.3.1 Set daily/weekly time schedules
Overview
This section describes how to set a daily, weekly repeated action/function.
Procedure
1.
Press the (
/
➔ SEL and PRO is displayed and the clock symbol flashes.
2.
Press the (
/
➔ Pro1 and the actual schedule status of Pro1 is displayed.
3.
Press the ( ) ( ) button to select time program Pro1, Prog2, Prog3
or Prog4.
➔ Number of time program flashes.
4.
Press the ( ) button briefly to go to the scheduler submenu.
➔ Schedule status indicates whether it is OFF or ON.
5.
Press the ( ) ( ) button to change the status.
6.
Press the (
/
Note: An "OFF" status disables all switching events for this time program!
7.
Press the ( ) ( ) button to select day/days of the switching event:
d1-7
= Monday (day 1) to Sunday (day 7)
d1-5
= Monday to Friday
d1-6
= Monday to Saturday
d6-7
= Saturday to Sunday
dAY1
=
Monday
...
...
dAY7
=
Sunday
8.
Press the (
/
Note: Monday is day 1 of the week!
9.
Press the ( ) ( ) button to select operating mode of switching
event number 1 indicating by 1 bar:
no
= Switching event not used
OFF
= Operating mode changes to off mode
ECO = Operating mode changes to unoccupied (economy) mode
ON
= Operating mode changes to occupied (comfort) mode
UNI
= Operating mode does not change
➔ 1 bar indicate setting of switching event 1 of 4 is executed.
Note: Not used switching events should be set to "no".
10. Press the (
/
11. Press the ( ) ( ) button to adjust the time the switching event will
execute from 00:00...23:45 in 15 minutes steps.
➔ 1 bar indicate setting of switching event 1 of 4 is executed.
12. Press the (
/
Doc: 70-00-0988A, 20220920
Subjects to alteration
O
PERATIONS
) button longer than 3 seconds.
) button.
) button to save the status.
) button to save.
) button to save.
) button to save.
© Vector Controls GmbH, Switzerland
www.vectorcontrols.com
M
T
P
ANUAL
IME
ROGRAMING FOR
TCY-BH
...
...
Page 4-6
Advertisement
