elmeasure LG 64 Series Programming Manual

HO & Unit -1 :
47-P, Hardware Park, KIADB ,
Huvinayakanahalli Bengaluru - 562149
Karnataka INDIA.
Sales Offices :
BENGALURU CHENNAI COIMBATORE

1. FEATURES

True RMS measurements.
Simultaneous sampling of voltage and current.
STAR, DELTA and 1PHASE Programmable wiring connections.
Universal Auxiliary supply 80 - 300V AC/DC.
Auto Scaling of Decimal point and Auto scrolling.
Old register to store previously cleared Energy values.
Programmable CT & PT Ratio.
Bar graph programmable for Amps/Watts/VA
User programmable password protection.
Energy Import and Export, number of interruptions available.
Individual Phase energy through communication.
Demand measurement for watts, VA & Var (only for LG 6400).
THD measurement upto 15th harmonics.
3-Row 12-digits display with unique look.
Individual phase angle measurement.
2. KEY & DISPLAY INDICATION
Mega
Minus
Phase angle
Kilo
Export
Energy
Maximum
Demand
Communication
To view the parameters
Downwards.

3. PROGRAMMING MODE

3.1 Programming Keys

To select / Edit &
save Value

3.2 Setup Procedure

Press Up + Down to enter setup mode .
Enter Password blinking of digit indicates Edit is possible.
(default 1000)
Press Down to decrement value from 9 to 1.
Press Up to move to the next digit till 4th digit .
If Password is correct, editing is possible.
Enters into clear mode and meter displays CLr.l (Refer 3.3A).
(Refer 3.3B only for 6400 ).
Press Down key to view and press
Press Down to decrement values or to select from available options.
Press Up to save the value / parameter.
Press Down to edit next parameter till end of last parameter &
display screen will prompt
Press Down to change to
Press Up to save.
support@elmeasure.com
Ph: +91 639-1010-320
Unit -2 :
Goutham Garden, No.4,
Veerapandi Coimbatore - 641 019 ,
Tamilnadu INDIA
MUMBAI DELHI HYDERABAD USA
PG/ 3R /V / 1 LG N 1 9 9
Value Indication
Total harmonic distortion
Percentage Load
Pulse
To view the parameter s Upwards.
To decrement
value
U p key to edit.
display reads (YES).
(NO) .
LG 64xx
LG 6400 LG 6445
LG 6435 LG 6425
UAE
0

3.3A Clear Mode : Clear Integrator

Press Up key
Press Down Key
Press Up key
to accept the edited
option

3.3B Clear Mode : Clear Demand

Press Up key
Press Up Key
Press Up key to
accept the edited
option

3.4 Display

Programming
Parameter
ELEMENT Defines
the power system
configuration
PT Primary
PT Secondary
CT Primary
CT Secondary
VA selection(UA.SL)
Baud rate (bA Ud
Parity (PrtY)
Device Id (dU. ) Id
Password
Energy value format
Selection(ENEr)
Pulse output On
time
www.elmeasure.com
Meter displays CLr.I. 'n' Meter displays CLr.M
(with n is blinking)
Displays CLr.I 'n' options
Option : (YES)/(NO)
can be changed by pressing 'y'(for clearing )
Down Key. Display will
'n' (for not clearing)
prompt to 'y' (or) 'n' while
pressing Down key.
Comes back to Default page
(Clear Mode ends here)
Meter displays CLr.M.
Displays CLr.M 'n' options Option : (YES)/(NO)
can be changed by pressing
'y'(for clearing )
Down Key. Display will 'n' (for not clearing)
prompt to 'y' (or) 'n' while
pressing Down key.
Comes back to Default page
(Clear Mode ends here)
Default
Option/Range
STAR /DELTA/ IPh (
100V-999kV To set 11kV Set first
four digits (1100) as explained
above. Press Up / Down
place decimal point at appropriate
location. LED K will indicate Kilo
50V - 550V
0.5A - 99KA
0.5A - 6A
Vector. harmonic/Vector/
Arithmatic.
)
2400/ 4800 /9600
/38.40k
Odd/ no(none)/EVEn
1.000 247.0 -
1000 - 9999
COUN (Counter) / RESL
(Resolution)
Range: 50ms to 500ms
SINGLE PHASE )
key to
/19.20k