HOMCOM 820-348V70 Assembly Instruction Manual page 9

OPERATING INSTRUCTIONS
1. Turn the thermostat knob on the control panel
(B) to the fear right (right picture) for higher
heating. If it is on the far left, the heating is
off. If the heating is set lower than room
temperature, the unit will not heat your room.
2. Turn the function knob on the panel (B)
to choose the mode you want.
3. Set the temperature by turning the
thermostat knob on the control panel (B).
To increase the temperature, turn the knob
right (clockwise). Turn left (anticlockwise) to
decrease the temperature.
Once you have chosen the desired
temperature, the heater will remain on until the
room temperature reaches that level. Then, the
heater will cycle on and off to maintain the
desired temperature.
9