How To Replace The Stylus; Specifications - PRIXTON TE-001 Instruction Manual

How to replace the stylus

The stylus should last about 50 hours under normal use. However, it is recommended that the stylus be
replaced as soon as you notice a change in sound quality
Removing an old stylus:
1. Set a screwdriver at the tip of the stylus and push
down to the direction "A".
2. Pull the stylus out toward direction "B".
Caution:
 Do not remove or bend the stylus.
 To avoid injury, do not touch the needle.
 Turn off the unit's power before you replace the stylus.
 Keep out of the reach of children.
 Handle with care, as the stylus is delicate. Use of a bent or broken stylus may damage therecord and
cause the turntable stylus to malfunction.
 Do not expose stylus to extreme heat.
 Contact a qualified repair company if you experience difficulty in changing the stylus.

SPECIFICATIONS

Product Name
Speaker Driver
Dimensions (each speaker)
Power
Inputs
PowerOutput
Frequency Range:
3 Speeds
Auto stop
RCA out
Recording
ACCESSORIES
1 x User's Manual
1 x AC/DC Adaptor (Input: AC 100-240V~; 50/60 Hz; Output: DC 5V, 1A, )
1 x 45 RPM Adaptor
Suitcase Style Bluetooth Turntable
5W *2
L13.8" x D10.2''x H4.9''(L350 x D260 x H125mm)
DC5V 1A
1 x 3 .5 mm stereo mini-jack
1 x Bluetooth
1 x USB card
1 x TF card
5Watts
FM : 87.5-108 MHz
33; 45; 78 rpm
Auto Stop ON or OFF
Yes
USB/TF card recording
Installing a new stylus
1. Hold the tip of the stylus and insert the other
edge by pressing toward direction "C".
2. Push the stylus up toward direction "D" until it
locks at the tip.