Table of Contents
Advertisement
Playing a record
1. In first time use, take off the protective cover from the stylus as the illustrated below:
2. Unlock the Tone Arm from the holder as the illustrated above.
3. Place the Record on the center spindle
4. Note: If you are playing a 45 RPM Single (small size record), place the supplied 45 RPM adapter
the center spindle then place the record on it.
5. Slide the Speed selector
Set the auto stop control
6.
end of the record. If the switch is set to OFF , the turntable will continue turning at the end of the
record.
7. Turn on the Power Switch
Pleas note the Switchalso controls volume.
8. Raise the Lever
Release the Lever
9. When finished playback, the unit will auto stop turning when Auto stop switch at " ON" position. If
Auto stop switch at "OFF' position, the turntable will continue turning at the end of the record.
10. Raise the Lever
lock the Tone Arm on the Holder.
Bluetooth function
(lift up the tone arm and put it on the rest)
For first time use or re-pairing to a new BT Device, pairing it as below:
Turn on the Power Switch
shows " bt" .
to 33 45 or 78 to match the play speed of the record.
to ON if you want the turntable to stop turning when it has reached the
, it comes to Phono mode automatically , And the display
to raising the Tone Arm then move it to the top of the desired location of the record.
to put the Tone Arm onto the record. Plays will auto start.
to rising the Tone Arm then put it back to the Holder
, thenpress " M" button
.
till it enter into Bluetooth mode. The display
show "-Pho".
. Release the Lever then
to
Advertisement
Table of Contents
