Location Of The Buttons - JVC KD-LHX502 Instructions Manual

Location of the Buttons

Control panel
(Standby/On/Attenuator) button
Turns on and off the power, and also attenuates
the sounds.
Remote
sensor*
Reset button
Reset the built-in microcomputer.
* DO NOT expose the remote sensor on
the control panel to strong light (direct
sunlight or artificial lighting).
WARNINGS on the battery:
• Store the battery in a place where
children cannot reach. If a child
accidentally swallows the battery,
consult a doctor immediately.
• Do not recharge, short, disassemble, or
heat the battery or dispose of it in a fire.
Doing any of these things may cause the
battery to give off heat, crack, or start a
fire.
4
VOLUME+/– button
Adjust the volume level.
MENU button
Show the Main Menu.
T/P button
Activates or deactivates TA Standby
Reception (and Road Traffic News
Standby Reception).
0 (eject) button
Open the control panel (and eject the
disc if any).
Touch Panel
Used to operate the receiver.
(control panel release) button
Detach the control panel.
DISP (display) button
Change the information shown on the display.
• Do not leave the battery with other
metallic materials. Doing this may cause
the battery to give off heat, crack, or start
a fire.
• When throwing away or saving the battery,
wrap it in tape and insulate; otherwise, the
battery may start to give off heat, crack, or
start a fire.
• Do not poke the battery with tweezers or
similar tools. Doing this may cause the
battery to give off heat, crack, or start a
fire.
T/P