Lansinoh Signature Pro Instructions For Use Manual page 11

3. Firmly push ComfortFit® Flange into
breast flange body.
NOTE: Use care when handling and cleaning the small white valve.
5. Screw collection bottle onto breast
flange body.
7. Attach other end of 300 mm tubing to
Tubing Y Connector.
4. Holding the base of the white valve,
gently secure the valve into the
bottom of the breast flange body.
6. Attach end of 300 mm tubing to back
of diaphragm cap. Ensure that tubing
is pushed all the way to the base of the
attachment port and completely covers it.
8. Repeat assembly process for second
breast flange body.
10