enphase IQ Encharge-3T-1P-NA Quick Install Manual

Q U I C K I N S T A L L G U I D E
Install the Enphase IQ
To install the Enphase IQ Battery 3T system or IQ
TM
in this guide. Safety warnings are listed on the back of this guide. These instructions are not meant to be a complete explanation of how to design and install
an energy storage system. All installations must comply with national and local electrical codes and standards. Only qualified electricians shall install, trou-
bleshoot, or replace the IQ Battery 3T or IQ
TM
The IQ Battery system includes the Enphase IQ
TM
production and home energy consumption. The IQ
when it is abundant and used when scarce. IQ
installed at the site.
Five unique installation
scenarios are shown:
Whole home backup with IQ System
TM
Controller as service entrance and
PV combiner connected to IQ
TM
System Controller. This is the preferred
configuration for back up of the entire main
load panel. This configuration supports up
to an 80A breaker for the PV circuit and an
80A breaker for battery storage.
NOTE:
1. For M215/M250 connection to Enphase
Energy System, refer tech brief at https://
enphase.com/en-us/storage-m-series
2. M series microinverters require Gateway-S
metered.
Whole home backup with IQ System
TM
Controller as service entrance and PV
combiner connected to main load panel.
This is the preferred configuration when you
back up the entire main load panel, and the
size of the PV combiner circuit is more than
80A. In this configuration, the PV combiner
circuit connection space in IQ System
TM
Controller is left vacant. When existing PV
combiner circuits are connected to the main
load panel, and you want to add battery
storage to the system, you can keep the PV
combiner connected to the main load panel
and connect only the battery storage to IQ
System Controller.
Partial home backup with main load panel
as service entrance and PV combiner
connected to IQ System Controller. When
TM
PV circuits breaker size is less than 80A,
this is the preferred configuration for partial
home backup with subpanel.
(Models Encharge-3T-1P-NA and Encharge-10T-1P-NA)
Battery 10T system and the Enphase wall-mount bracket, read and follow all warnings and instructions
TM
Battery 10T.
TM
Battery(ies) with integrated Enphase IQ
TM
Battery system senses when it is optimal to charge or discharge the battery so that energy is stored
TM
Battery systems are capable of providing backup power when an Enphase IQ
TM
TM
© 2022 Enphase Energy. All rights reserved. Enphase, the Enphase logo, IQ
App, and other trademarks or service names are trademarks of Enphase Energy, Inc. Data subject to change. Rev09- 07-13-2022
Battery System
TM
Microinverters. The Enphase IQ
TM
Battery, IQ
TM
Gateway measures PV
TM
System Controller is
TM
(optional)
(optional)
(optional)
Gateway, IQ combiner, IQ Microinverter, Enphase Installer
TM TM TM