5. Cable Extension Options
Extend the cable run for your camera. Additional extension cable
separately, as below:
CAT5e [or higher] Ethernet cable
You can use a Rj45 coupler or switch {not included} to connect male
u
ends of Ethernet cable together.
To extend the cable run beyond 300ft {92m}, a switch will be required
u
{sold separately}
6. Connecting the Camera
To Camera:
1. Connect the Ethernet cable to the camera.
Note: A power adapter is not required for the use of this camera.
2. Connect the other end of the Ethernet cable to the NVR's Camera In ports.
Note: The camera may take up to 1 minute to power up after.
Setup Diagram
Cable Type
Max Cable Run
Distance
300ft {92m}
To NVR: