Table of Contents
Advertisement
WARNING/CAUTION
u Use the camera only with compatible NVR which support resolution 5.0 megapixel or above. If your NVR only support 1080P,
need
to modify the resolution of cameras through web interface of the camera.
Need
help? Please mail: tech@ebulwark.com
Read
this guide carefully and keep it for future reference
u
Use the camera
within given temperature,
u
Do not point the
camera directly towards t
u
Periodic cleaning may be required. Use a
u
TROUBLESHOOTING
Camera
No picture/signal
Picture is too bright
Picture is too dark
Night vision is not working
Picture is not clear
humidity and voltage levels noted in Camera Specifications
he sun or a
source of intense light
damp cloth
only. Do not use harsh cleaners or aerosol cleaners
u Ensure the camera is
is 5/8MP, your NVR
input. If not, please
web interface.
Ensure the camera is
u
network.
u The camera may take
connected
to the
NVR.
below.
There may
be an issue with your extension cable run.
u
Connect the camera to the NVR using a different
u
If you are not using POE, you must connect the camera
u
power adapter(not included).
u If the camera is connected to the LAN, you must search your
network for
cameras using the NVR. See th NVR's instruction
manual.
Ensure the
IP Address of the camera is in the same segment of your
u
PC (standalone Use)
Ensure the IP address
u
NVR(with NVR use) See the NVR's instruction manual.
u Ensure your camera isn't pointed directly at a source of
(e.g.sun or spot light)
u Slide
the sunshade(bullet cameras featuring adjustable
only)
forward to block excess light
Move
your camera to
u
Check the
brightness
u
dark
u If using during the day, the camera may not be getting enough light,
Slide
the sunshade(bullet cameras
only)
backwards to let in more light
u Check the brightness and contrast settings on the NVR
u The night
vision
activates when light levels drop. The area may have
too much
light
u Check
the camera lens for dirt,
with a
soft, clean cloth
u Make sure that the cable run is within
section Cable Extension Options'
connected to a compatible NVR. This camera
should
support
5.0/8.0MP or
modify
the cam
era resolution
connected to your NVR or to your local
up to 1 minute to power up after being
Wait two minutes before following the steps
of the camera is in the sme segment of
a different location
and contrast settings on the NVR
featuring adjustable sunshades
dust, spiderwebs. Clean the lens
the limitations specified in the
above res
olution
to 1080P
from the
Ethernet
cable
to
a 12V DV
light
sunshades
Picture too
Advertisement
Table of Contents
