Related Manuals for Elo TouchSystems E990282
Summary of Contents for Elo TouchSystems E990282
- Page 1 ASSEMBLY INSTRUCTIONS, PRO-STYLE EMV CRADLE KIT FOR WALLABY PRO SELF SERVICE STANDS, COMPATIBLE WITH VERIFONE P400 © Copyright 2022 Elo Touch Solutions, Inc. UM600683 Revision A...
- Page 2 Contents for Kit: E990282, Pro-style EMV cradle kit for Wallaby Pro self-service stands, compatible with Verifone P400 Hardware Mounting Screw, M4x8, Pan Head, Qty.4 Screws Cross Recess, Black P400 Screw, M3x6, Pan Head, Qty.2 Screws Cross Recess, Black Cradle Assembly Qty.
- Page 3 EMV plate For assembly with 22” displays, skip to step 2. Disassemble cable cover by removing two screws. Reserve screws. For assembly with 24” or 27” displays, remove four screws shown. Align left edge of EMV plate with corresponding mark on arm.
- Page 4 Keyholes Tie down Add (2) screws for mounting EMV terminal from “P400 Reassemble cable cover by installing two screws. Screws” bag. Don’t tighten screws completely. Leave Route cable as shown and tie down using cable approximately 3/32” (2mm) gap under screw head. tie from Wallaby Pro accessories.
- Page 5 Rear Screws Front Screws Assemble arm to stand, ensuring front tabs are inside opening Partially install two rear screws (from “Mounting Screws” bag). in display bracket. Install two front screws from “Mounting Screws” bag. Fully tighten rear screws. © Copyright 2022 Elo Touch Solutions, Inc.
- Page 6 If EMV terminal includes a DC power supply, remove AC cable from power supply, and install power supply in left bay as shown. Secure power supply with velcro strap. Use a 0.3m power cable from the Wallaby Pro accessories (either C5 or C13, depending on the printer power supply) to connect the power supply to the power strip.
- Page 7 Learn more about Elo at EloTouch.com. Americas Europe (EMEA) Asia Pacific Tel +1 408 597 8000 Tel +32 16 930 136 Tel +86 (21) 3329 1385 EloSales.NA@elotouch.com EMEA.sales@elotouch.com EloAsia@elotouch.com The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively “Elo”) makes no representations or warranties with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose.