Advertisement
7
Route
USB cable
from EMV terminal to USB hub.
8
If EMV terminal includes a DC power supply, remove AC cable from
power supply, and install power supply in left bay as shown. Secure
power supply with velcro strap. Use a 0.3m power cable from the
Wallaby Pro accessories (either C5 or C13, depending on the printer
power supply) to connect the power supply to the power strip.
If EMV terminal includes wall-wart style adapter, an IEC C13 to AC
adapter is required. For North America, StarTech P/N PAC100 is
recommended.
Return to Wallaby Pro assembly instructions to
complete assembly.
© Copyright 2022 Elo Touch Solutions, Inc.
6
Advertisement
