Table of Contents
Advertisement
2.1.4
Reset Button
The WISE-3200 series has a reset button on the left side. Press this button to acti-
vate the hardware reset function.
2.1.5
Ethernet Connector (WAN, LAN)
The WISE-3200 series provides 1 x RJ45 WAN and one RJ45 LAN interface connec-
tor. It is fully compliant with IEEE802.3/802.3u and IEEE 802.3x flow control for back
pressure for half duplex. These Ethernet ports provide standard 1 x RJ-45 connector
with LED indicators that indicate active/inactive statuses.
2.1.6
USB 2.0 Port
The WISE-3200 series provides 1 x USB 2.0 interface.
2.1.7
Serial Port
The WISE-3200 series provides 1 x D-sub 9 serial port which can be configured for
either RS-232, RS-422, or RS-485 interfaces for Modbus RTU feature. Open the
housing to change the hardware switch (Location at SW2) on PCBA for correspond-
ing demand interface (the default setup is RS-485).
WISE-3200 Series User Manual
Figure 2.7 Reset Button Locations
Figure 2.8 WAN/LAN Locations
Figure 2.9 USB 2.0 Port
Figure 2.10 RS-232, RS-422, or RS-485 interfaces
10
Advertisement
Table of Contents
