RH LUCIDA DESK Instructions

Thank you for choosing this quality product. Be sure to check all packaging materials carefully for small parts that may
have become loose during shipment and place all parts on a non-abrasive surface.
! WARNING: Desk parts can be cumbersome and heavy; therefore, the assistance of two or more
people is recommended in order to prevent personal injury and ensure the table is not damaged during the
assembly process.
PARTS INCLUDED
A [1] GLASS TOP
B [2] LEG FRAMES
ASSEMBLY INSTRUCTIONS
1. A work bench or small, sturdy table is
required for assembly. Place the glass
top (A) onto the work bench or table.
Ensure the ends of the glass overhang
the bench.
2. In the hardware pack, locate the metal
washers (3) and silicon washers (2).
Place them in the cavities of the leg
frames, as shown in Figure 01.
3. Gently slide the cavity of the leg frames
(B) onto both ends of the glass top up to
the end of the protective film, as shown in
Figure 01.
4. After inserting the leg frames, remove the
desk from the work bench and set it on
the floor. IMPORTANT: Four or more
people are recommended when lifting the
desk.
11/1/18
LUCIDA DESK INSTRUCTIONS
FIGURE 01
SILICON
WASHER
METAL
WASHER
HARDWARE INCLUDED
NO. ITEM DESCRIPTION
Headless Socket Screw Bolt
1
2
3
4
QTY.
4 PCS
Silicon Washer 4 PCS
Metal Washer 8 PCS
2 PCS
Allen Wrench
Page 1 of 2