5121-340 COMPETITION PROFILE TRAINING BEAM Assembly Instructions Thank you for purchasing the SPIETH America #5121-340 16’ Competition Profile Low Training Beam from our line of Gymnastics Equipment. We appreciate your business and value you as a customer. Please carefully read the following instructions before assembling and using your new equipment.
Page 3
5121-340 COMPETITION PROFILE TRAINING BEAM Assembly Instructions 1. Assembly You will require one Adjustable wrench and one Rubber Mallet to perform the assembly procedure of this apparatus. The Beam Legs and Beam Top are heavy and can be difficult to balance if not held properly while handling.
5121-340 COMPETITION PROFILE TRAINING BEAM Assembly Instructions Low Legs can be positioned anywhere along the length of the Beam Top simply by sliding the Low Leg to the desired location. HOWEVER, PLEASE KEEP IN MIND THAT THE LOCATION OF THE LOW LEGS AFFECTS THE STABILITY OF THE FINISHED APPARATUS.
Page 5
5121-340 COMPETITION PROFILE TRAINING BEAM Assembly Instructions 3. SAFETY WARNING Any activity involving motion or height creates the possibility of serious injury including permanent paralysis and even death, from landing or falling on the neck, head, or other parts of the body.
Need help?
Do you have a question about the 5121-340 and is the answer not in the manual?
Questions and answers