Advertisement
Available languages
Available languages
6.2 Product Specifications
•
Display: LCD, 2 lines, 8 characters, backlit
•
Operating Temperature: 0 to 50°C (-32 to 122 F°)
•
Storage Temperature: -20 to 70°C (-4 to 158 F°)
•
Dimensions (LxWxH): 126x78x28 mm ( 5.0"x3.2"x0.85")
•
Weight: 200g (7.12 oz)
6.3 Connecting the Analyzer Before Testing
•
Before the test, please use the wire brush and alkaline cleaner clean
battery pole column, as well as grease and dust have error on test
results.
•
At the start of the test, to ensure that all of the car electronics has
closed, the door closed, and the ignition key is turned off.
•
The red test clip to the battery positive electrode, the black test clip
to battery cathode.
Tester require two clips polar to contact with the battery polarity is good,
but with bad connection, the tester will not be able to boot. If this happens,
please clean the terminal after properly connected again.
Tester has an automatic protection function, if the red and black clip is
negative, screen is not bright, but it will not have any adverse effects on
tester and the motor load.
6.4 Testing
Tester will start automatically when clip folder correct, display boot
interface.
BATTERY TOOL
26
Ver 2.00
VOLTMETER
13.38 V
Advertisement
