Advertisement
Page
Ver.
Item
Others
CHU Color Bars
Filter WHT MEM
Rotation
ID On Bars
Date On Bars
Time On Bars
Zoom Disp
HDC-750A
Settings
Contents
On, [Off]
Turns the camera color-bar signal output on and off
[On], Off
On: Four white balance values can be stored in white balance
Off: One white balance value can be stored in white balance
[STD], RVS
Selects the mode of MENU SEL switch (as turned counter-
clockwise when viewed from the front)
STD: Cursor moves downwards and a numeric value increases
RVS: Cursor moves upwards and a numeric value decreases
On, [Off]
Selects whether the camera ID is mixed with a camera output
signal in the color-bar mode, or not (This setting is valid only
when the VF DISP switch is set to ON or OFF)
On, [Off]
Selects whether the date characters are mixed with a camera
output signal in the color-bar mode, or not (This setting is valid
only when the VF DISP switch is set to ON or OFF)
On, [Off]
Selects whetehr the time characters are mixed with a camera
output signal in the color-bar mode, or not (This setting is valid
only when the VF DISP switch is set to ON or OFF)
Left, [Right]
Changes the indication location of the zoom position status
displayed on the VF
Left: Zoom position is located on the left
Right: Zoom position is located on the right
memory A or B corresponding to the setting of the CC
filter, for a total of 8 settings
memory A or B, for a total of 2 settings (CC filter positions
can be stored)
3-1. Setup Menu
3-1-6. SYS Config Menu
3-17 (E)
Advertisement
