Nikon Z 7II User Manual page 912

Hide thumbs Also See for Z 7II:

Table of Contents

Lens hood lock

alignment mark

mounting mark

6 Focal length scale Determine the approximate focal length when

7 Focal length mark

8 Control ring

Lens mounting

Rubber lens-

mount gasket

11 CPU contacts

13 Front lens cap

14 Rear lens cap

Lens hoods block stray light that would

otherwise cause flare or ghosting. They also

serve to protect the lens.

Use when attaching the lens hood.

Rotate to zoom in or out. Be sure to extend the

lens before use.

zooming the lens in or out.

Autofocus mode selected: In autofocus

mode, you can rotate this customizable ring

to perform a function selected with the

Manual focus mode selected: Rotate to

Use when mounting the lens on the camera.

Used to transfer data to and from the camera.

Choose A for autofocus, M for manual focus.

Note that regardless of the setting chosen,

focus must be adjusted manually when manual

focus mode is selected using camera controls.

NIKKOR Z 24–70mm f/4 S Lens Manual

Chapters

Table of Contents

Z 6ii N1932 N1929