Table of Contents
Advertisement
5.14. Removing the DG-Board
1. Remove the shield plate. (See 5.3.)
2. Disconnect the couplers (DG1, DG2, DG3 and DG6900).
*When removing coupler (DG6900), cautions are required for the
handling of a connector. (See 5.9.)
3. Remove the fixing screws (4pcs).
4. Remove the DG-Board.
5.15. Removing the PH-Board
1. Remove the rear cover. (See 5.2.)
2. Remove the PH shield plate. (See 5.4.)
3. Disconnect the couplers (PH1, PH2 and PH3).
4. Remove the fixing screws (2pcs).
5. Remove the PH-Board.
15
Advertisement
Table of Contents
