5.12. Removing the A-Board
1. Remove the shield plate. (See 5.3.)
2. Remove the angle. (See 5.5.)
3. Remove the terminal cover. (See 5.10.)
4. Remove B-Board. (See 5.11.)
5. Disconnect the couplers (A1,A2, A3 and A5).
6. Disconnect the coupler (A9), and unlock the cable clamper to free
the cable.
7. Remove the fixing screws (3pcs).
8. Remove the A-Board.
5.13. Removing the IC Heat Shink
1. Pressing IC Heat Shink Spring and pull up IC Heat Shink.
14