Using A Pedal Or An Ex Button To Cycle Through Multiple Setup Registrations (Sequential Recall - Casio Privia PX-S7000 User Manual

Using a Pedal or an EX button to Cycle Through Multiple Setup
Registrations (Sequential Recall)
Registrations can be sequentially recalled using a pedal connected to the EXPRESSION/
ASSIGNABLE jack or one of the EX buttons.
■ To use a pedal to cycle through multiple setup registrations
1.
Connect a pedal to the EXPRESSION/ASSIGNABLE jack.
• Make sure the pedal type corresponds to the connected pedal (see
(page EN-63)).
2.
Refer to "To select freeze
setting to "On".
3.
Refer to "To enable or disable
function.
4.
Refer to "To specify the pedal
"Pedal Target" to "Seq Recall Inc" or "Seq Recall Dec".
5.
Step on the pedal to recall a registration.
• When the set value is "Seq Recall Inc":
Briefly stepping on the pedal recalls registrations in ascending order of "bank number –
registration number" (i.e., 1-1, 1-2, 1-3, 1-4, 2-1, 2-2...). Stepping on the pedal and holding it
recalls registrations in reverse order (i.e., 2-2, 2-1, 1-4, 1-3...).
• When the set value is "Seq Recall Dec":
Briefly stepping on the pedal recalls registrations in descending order of "bank number -
registration number" (i.e., 24-4, 24-3, 24-2, 24-1, 23-4, 23-3...). Stepping on the pedal and
holding it recalls registrations in reverse order (i.e., 23-3, 23-4, 24-1, 24-2...).
Saving and Recalling Performance Setups (Registration)
items" (page EN-83) to switch the "Pedal/Wheel"
freeze" (page EN-83) to turn on the Freeze
function" (page EN-64) to change the value of
EN-84
"To specify the pedal type"