Table of Contents
Advertisement
en
Cleaning and servicing
Cleaning and servicing
The appliance and all the attachments
and accessories used must be thoroughly
cleaned after each use.
W Risk of electric shock!
– Unplug the appliance before cleaning it.
– Never immerse the base unit in liquids
and do not clean in the dishwasher.
– Do not use a steam cleaner.
W Risk of injury!
Do not touch the blender blades with your
bare hands.
Caution!
– Do not use any cleaning agents
containing alcohol or spirits.
– Do not use any sharp, pointed or metal
objects.
– Do not use abrasive cloths or cleaning
agents.
Notes:
– It is best to clean the parts immediately
after use. This will prevent residues from
drying on and possibly attacking the
plastic (e.g. essential oils in herbs).
– Pour a little water and washing-up liquid
into the empty blender jug and hold
down button u for a few seconds.
– The plastic parts may become dis-
coloured when you process certain ingre-
dients, such as carrots, but this can be
removed with a few drops of cooking oil.
In Fig. F you will find a summary of how to
clean the individual parts.
Base unit
Wipe the outside of the base unit with a
soft, damp cloth and dry off.
Blade holder
Remove the seal before cleaning. Only clean
the blade holder with a brush under running
water. Don't leave it soaking in water!
X Fig. I
14
Blender jugs and lids
You can clean the blender jugs and other
parts with a detergent solution and a
soft cloth or sponge, or put them in the
dishwasher.
Safety systems
Start lock-out and automatic
cut-out
The appliance can be switched on only
if the blender jug has been latched firmly
into place. The appliance will switch off
auto matically if the blender jug becomes
detached while it is running.
X "Troubleshooting" see page 14
Troubleshooting
W Risk of injury!
Before dealing with any faults, unplug the
mains plug.
Fault
Appliance fails to start up or switches
off while in use. The illuminated ring
( depending on the model) does not light up.
Possible cause
Blender jug is not correctly positioned or
has become detached.
Remedy
■ Release the button. Disconnect the
mains plug.
■ Position the blender jug correctly and
turn it until it latches audibly into place.
■ Plug the mains plug into the mains.
Press the t or u button again to test the
function.
Important note
If this does not resolve the problem, please
contact customer service. X You will find
their contact information at the end of these
operating instructions
Advertisement
Chapters
Table of Contents
