Led/Follow Me Function; Turbo/Self Clean Function - Bosch ASI09DW40 Manual

TIMER ON → TIMER OFF
(Off → Start → Stop operation)
TIMER ON OFF
This feature is useful when you want to start
the air conditioner before you wake up and
stop it after you leave the house.
Example:
Start
To start the air conditioner 2 hours after setting,
Off Stop
and stop it 5 hours after setting.
1. Press the TIMER ON button.
2. Press the TIMER ON button again to display
Set
2 hours later
5 hours later
after setting
after setting
2.0h on the TIMER ON display.
3. Press the TIMER OFF button.
4. Press the TIMER OFF button again to display
5.0h on the TIMER OFF display .
5. Wait for 3 seconds and the digital display area
will show the temperature again. The "TIMER
ON OFF" indicator remains on and this function
is activated.
NOTE: The timer setting(TIMER ON or TIMER
OFF) that in sequence occurs directly after the
set time will be activated first.
SLEEP function
Press this button will initiate SLEEP function.
The sleep function enables the unit to automa-
tically increase(cooling) or decrease(heating)
ON/OFF
O
1 C per hour for the first two hours, then hold
TEMP
steady for the next 5 hours, after that the unit
will stop operation. It can maintain the most
MODE SILENCE
FP
comfortable temperature and save energy.
FAN NOTE: The SLEEP function is only available
SWING
SPEED
under Cooling, Heating and AUTO operations.
TIMER
DIRECT
ON
TIMER
1
SLEEP
OFF
TURBO LED
SELF FOLLOW
CLEAN ME
LOCK RESET
13

LED/FOLLOW ME function

Press this button less than 2nds will initiate LED
function. And if keep pressing this button more
than 2nds,the FOLLOW ME function is initiated.
When the Follow Me function is activated,
the remote display is actual temperature at
its location. The remote control will send this
signal to the air conditioner every 3 minutes
interval until press the FOLLOW ME button
again.
The Follow Me function is not available under
ON/OFF
DRY and FAN mode.
TEMP
Switch the operation mode or turn off the unit
will cancel the Follow Me function automatically.
MODE SILENCE
FP
FAN
SWING
SPEED
TIMER

TURBO/SELF CLEAN function

DIRECT
ON
Press this button less than 2nds will initiate
TIMER
SLEEP
OFF
TURBO function. And if keep pressing this
button more than 2nds,the SELF CLEAN
TURBO
LED
SELF
FOLLOW 1
2
CLEAN
ME
function is initiated.
Turbo function enables the unit to reach the
LOCK RESET
preset temperature in the shortest time. When
press this button on cooling mode, the unit will
blow strong cooling air with super high fan speed.
When press this button on heating mode
(applicable to the unit adopts PTC only), the PTC
will be energized and bring fast heating operation.
Under SELF CLEAN mode, the air conditioner
will automatically clean and dry the Evaporator
and keep it as fresh for the next operation.
14