Caller Announcement; Adjust The Volume; Smart Sensors - Plantronics Voyager Legend User Manual

If your smartphone has a voice-enabled assistant, press the call button for 2 seconds
and wait for the phone prompt.
When wearing your headset, you will hear the name of a contact which is calling you,
so that you can decide whether you want to answer or ignore the call. The caller
name will be announced if the following conditions are fulfilled:
- Your phone has the Phone Book Access Profile (PBAP)
- You granted access to your contacts during pairing process
- The contact is stored
However, in the following situations, an incoming caller name is not announced:
- If you use the sensors to automatically answer a call while putting on your
headset
- If the caller is unknown, unlisted, or blocked
- If your phone doesn't support PBAP
Note: Cantonese, Danish, Japanese, Korean, Russian and Swedish do not have
native language caller announcement support.
During a call, you can mute the microphone:
- Tap the Mute button. You will hear "mute on" confirmation. An alert repeats
every 15 minutes to remind you that the microphone is mute.
- Tap the Mute button again to open the microphone and hear "mute off"
confirmation.
Toggle the Volume button up (+) or down (-) during a call or while streaming audio.
This headset uses Smart Sensors technology to recognize if the headset is being
worn and can automatically perform time-saving functions:
- Putting on your headset will answer an incoming call, transfer an active call
from your phone, resume streaming audio
Voice dial

Caller Announcement

Mute

Adjust the volume

Smart sensors

6