Plantronics Voyager Legend User Manual page 3

The first time you power on your headset, it starts the pairing process.
1. Wearing your headset, power it on. You will hear "pairing" and the headset
indicator lights will flash red and blue.
2. Activate Bluetooth on your phone and set it to search for new devices:
- iPhone Settings > Bluetooth > On
- Android > Bluetooth: On > Scan for devices
3. Select "PLT_Legend"
If necessary, enter four zeros (0000) for the passcode or accept the
connection. Once the device is successfully paired, you'll hear "pairing
successful" and the headset indicator lights will stop flashing.
Note: To enable caller name announcement, allow access to your contacts.
If you want to pair another phone with this headset, follow these steps:
1. Switch on your headset, then tap the "Voice button" and say "Pair mode" or
press and hold the "Call button" until you hear "Pairing".
2. While the headset LEDs are flashing red and blue, activate Bluetooth on your
phone and set it to search for new devices.
3. Select "PLT_Legend." If your phone asks, enter four zeros (0000) for the
passcode or accept the connection.
4. Once successfully paired, LEDs will stop flashing red and blue and you'll hear
"pairing successful."
Note: To enable caller name announcement, allow access to your contacts.
Pairing
Pairing another phone
2