Summary of Contents for Opitec Rocket Vehicle with Reverse Propulsion
Page 1
Therefore children should be kept under adult supervision at all times when inflating them. Store all non inflated balloons out of the The OPITEC handicraft packs are not toys in a typical off-the-shelf sense, reach of young children. but rather additional teaching and learning material for educational pur- Remove all burst balloon pieces at once and dispose of them safely.
Page 2
Instructions 104966 Rocket vehicle with reverse propulsion On the base plate (1), mark the position for the axle supports (ring screws 5) according to the dimensions. Then precut with the pricking awl. Insert the axles through the ring screws, as shown, and fix a steering Screw in the ring screws (5) at the marked positions as shown.
Page 3
Instructions 104966 Rocket vehicle with reverse propulsion Insert the blowpipe (8) centered into the steel spring clamp (3), as Place the balloon (9) on the end of the blowpipe so that it is shown above. stuck. Done! Functioning: Blow up the balloon through the blowpipe. Place the vehicle on the ground and let it go.