Add Or Change A Password - Clarion AUTOPC 310C Owner's Manual

To add a password
120

Add or Change a Password

Use a password to protect your data. A password is up to 4 numbers and
a custom command word. Password protection is enabled after the
ignition is cycled off then on. Auto PC prompts you for a password the
first time you enter protected programs (e.g. Address Book).
Manual ! !
Press Start, then
highlight Setup, then
to select Password
then
Press
Use the Keys to enter
up to 4 numbers, then
Re-enter 4-digit
password, then
Press , then record
<custom command
word> three times
Comments
to
To highlight and access Setup program.
To select Password parameter.
To enter the Password edit screen.
Use the number keys on right side of DCP.
The numbers will become your password.
Re-enter your password to confirm.
To record a voice password Display reads:
"Custom Command successfully recorded"
(for 5 seconds) and "Password confirmed.
Your password takes effect after restarting
your vehicle" (for 5 seconds).
Clarion AutoPC Owner's Manual