Jp14 Clear Cmos Jumper - AOpen i55HMt-HD Manual

2.11 JP14 Clear CMOS Jumper

You can clear CMOS to restore system default settings. To clear the CMOS,
follow the procedure below.
1. Turn off the system and unplug the AC power.
2. Locate JP14 and short pins 2-3 for a few seconds.
3. Return JP14 to its normal setting by connecting it to Pin 1-2 again.
4. Connect ATX power cable back to connector PWR3.
Tip:
When should I clear CMOS?
1. Boot fail .....
2. Forget password .....
3. Trouble shooting .....
1
Clear CMOS Normal (Default)
JP14 Clear CMOS Jumper
1
18