Connecting Front Panel Cable - AOpen i55HMt-HD Manual

2.7 Connecting Front Panel Cable

Attach the power LED, speaker and reset switch connectors to the
corresponding pins. If you enable "Suspend Mode" item in BIOS Setup, the
ACPI & Power LED will keep fl ashing while the system is in suspend mode.
Locate the power switch cable from your housing, which is a 2-pin female
connector from the housing front panel. Plug this connector to the soft-power
switch connector marked SPWR.
POWER SWITCH
Front Panel Connector
GND
RESET
GND
GND
NC
POWER LED +
GND
POWER LED -
GND
SPEAKER
NC
GND
+5V
+5V
HDD LED
HDD LED
+5V
NC
NC
Pin 1
14