Hitachi PC-ARFP1E Installation And Operation Manual page 38

TEST RUN MENU
6.9 SETTING INITIALIZATION
This function re-establishes the function selection and Input/
Output values to factory setting values.
1 Press and hold " " (menu) and "
simultaneously for at least 3 seconds during the normal
mode (when unit is not operated). The test run menu will be
displayed.
Test Run Menu
Indoor Unit Address Change
Address Check Operation
Address Initialization
Setting Initialization
Main Remote Setting
Sel.
2 Select "Setting Initialization" from the test run menu pressing
" " and "OK".
3 Select the indoor unit by pressing "
*This screen is not displayed when the number of indoor
units connected with the remote control switch is 1. In this
case, (4) will be displayed.
Setting Initialization: All
01-01 02-01
01-02 02-02
01-03 02-03
01-04
02-04
Sel.
ADJ
4 To start initialization, select "Yes" and press "OK" on the
confirmation screen. It takes approx. 30 seconds to complete
the process.
*Check that initialization will not cause any problems, and
then start the initialization work.
Address Initialization: All
Restore factory default
settings for function
selection and input/output?
Yes
Sel.
30 PMML0496 rev.1 - 12/2020
" (return / help)
/ ?
02
/
03
OK Entr Rtrn
ADJ
" and press "OK".
03-01 04-01
03-02 04-02
03-03 04-03
03-04 04-04
ON Rtrn
No
OK Entr Rtrn
5 Select "Completed" and press "OK". The test run menu will
be displayed.
Press " " (return / help) on the test run menu to return to
/ ?
the normal mode.
To initialize setting for the other indoor units, select
"Cont. Setting" and press "OK". The screen will return to (3).
Setting Initialization: All
Cont. Setting
Sel.
?
N O T E
• "No Function" will be indicated when the indoor unit that does not
support the initialization function for "Function Selection" and "Input/
Output Setting".
• The setting for indoor units that does not support the initialization
function for "Function Selection" and "Input/Output Setting" will not be
initialized even when "All" is specified at item (3).
Completed
Completed
Entr