Siemens LI63TCA 1T Series Instruction Manual page 9

Removing the metal grease filter
Pulling out the filter drawer
1.
Push the lock and push the metal grease filter
2.
backwards and pull downwards.
While doing this, place your other hand under the
metal grease filter.
To avoid causing damage, do not bend the
Note:
metal grease filter.
Take the metal grease filter out of the holder.
3.
Fat may accumulate in the bottom of the metal
Note:
grease filters. Hold the metal grease filter level to
prevent grease from dripping out.
After removing the metal grease filter, clean the
4.
inside of the appliance.
Clean the metal grease filter and allow it to dry
5.
before re-fitting.
Installing the metal grease filter
Attach the metal grease filter.
1.
While doing this, place your other hand under the
metal grease filter.
Fold the metal grease filter upwards and engage the
2.
locking mechanism.
Changing the activated charcoal filter (only
in circulating-air mode)
The filter should be serviced regularly to achieve the
odour isolation level.
The activated charcoal filter must be replaced at least
every 4 months.
Notes
The activated charcoal filter is not included. You can
■
purchase the activated carbon filter from your
authorised dealer, customer service or the online
shop.
The activated carbon filter cannot be cleaned or
■
reactivated.
Remove the metal grease filter.
1.
Turn the old activated charcoal filters and pull them
2.
from the holder. ¨
Push the new activated charcoal filters onto the
3.
holder and turn. ©
Attach the metal grease filter.
4.
en
9