Hot Key3 (Selecting The Input); Main Menu - Acer X34 User Manual

Hot key3 (Selecting the input)

Open the Input control and select DP, HDMI1(2.0),HDMI2(2.0), HDMI3(2.0)
When you are done, press the joystick to exit current page and store.

Main Menu

• Press the MENU key to open the OSD.
• Toggle the joystick
toggle to the right to navigate to the element you wish to adjust and press the joystick
to enter it.
• Toggle the joystick
Information Hot Key
Modes Hot Key
X
Exit Hot Key X
Picture
• Ref.white / Peak.white (nits): Adjust the Ref.white / Peak.white (nits) from 40 to 400.

otee:

Adjusts the balance between light and dark shades.Contrast: Adjust the
contrast from 0 to 100.

otee:

Sets the degree of difference between light and dark areas.
• Blue Light: Filters out blue light to protect your eyes by adjusting how much blue light
is shown – Off, 80%, 70%, 60%, or 50%.


otee: Higher values allow more blue light through. For the best protection select a
lower value.
When Blue Light function is set to On, Brightness and Contrast will show
each level of Blue Light value.
to the up or down
to the left or right
: Show Monitor Information and Reset control function.
: To change Modes Hot Key menu.
: To exit current page and store.
13
to select Picture from the OSD. The
to adjust the sliding scales.
X34 User Guide English