Table of Contents
Advertisement
Wall Mounting
Preparing to install an optional wall mount arm.
This monitor can be attached to a wall mounting arm you purchase separately. Disconnect
power before this procedure. Follow these steps:
1.
Remove the base.
otee:
Remove the base.
Step 1: Detach and remove the VESA covers with a flathead screwdriver.
Step 2: Loosen and remove the screws with a screwdriver, then lift and
remove the stand arm.
2.
Follow the manufacturer's instructions to assemble the wall mounting arm.
3.
Place the wall mounting arm onto the back of the monitor. Line up the holes of the
arm with the holes in the back of the monitor.
4.
Insert the 4 screws into the holes and tighten.
5.
Reconnect the cables. Refer to the user's manual that came with the optional wall
mounting arm for instructions on attaching it to the wall.
6.
Please be sure that the fan can not be touched after installing the wall mounting kit.
X34 User Guide English
4
Hide quick links:
Advertisement
Table of Contents
