Table of Contents
Advertisement
OPERATION
Timer is activated.This timer is pre-set for a 12 second delay and
allows oil pressure, high engine temperature, underspeed, and
charge failure to stabilize without triggering the fault.
5. If a fault occurs after the 12 second delay, see section
Troubleshooting Automatic Shutdown. 5. If a fault occurs after the
12 second delay, see section Troubleshooting Automatic
Shutdown.
6. Allow engine to warm up 3mins before operating lights.
7. Turn the light switch in the "ON" position
NOTICE: Do not use starting fluids to aid in starting of engine.
2.10 Stopping the Machine
Prerequisite Lights are turned off.
NOTICE: Generator will be damaged if the engine is shut down before turning off
the lights.
Stopping the machine Push the OFF button to de-energize the fuel solenoid.
2.11 Restart the light on (Once the lights are turned off, you can not turn on the
lights immediately)
Make sure the light switch is in the OFF position.
Cooling the light for 20-30mins
Return the light as the order : Start the generator→turn on the power switch→turn
on the light switch
2.12 Transportation
Prerequisites
Make sure the switch of generator and light are in the OFF position.
Lower the tower down
Notice
The direction of front wheel is opposite with the
direction of steering handle.
WARNING
Block the machine and fixed completely by
rope when transports the machine by car.
18
Advertisement
Table of Contents
