Kaiterra Sensedge Faq And Troubleshooting page 8

KAITERRA www.kaiterra.com
Does the Sensedge allow login for secondary MQTT?
No. It only supports anonymous MQTT. Anonymous MQTT does not require or allow
login info.
What happens to data recorded while the Sensedge is o!line?
If the Sensedge is turned on but not connected to the Internet, it still records and
saves readings to local storage for later upload.
When connectivity is restored, it will continue sending current readings once per
minute. At the same time, it will send data pending upload to the server, prioritizing
with the most recently recorded data.
How much data does the device transfer? What are the bandwidth requirements?
A single reading for a minute is typically around 300-350 bytes per message. With all
of the other data included, a rough average of data transmission speed is around 1kB
per minute, which equals approximately 1.4MB per day.
How fast does the Sensedge upload o!line historical data to the cloud?
The Sensedge uploads 10 records to the cloud per minute.
The time needed to upload historical data to the cloud can be derived by dividing the
o#line time period (in days) by 10.
Page ! 8