Kaiterra Sensedge Faq And Troubleshooting page 5

KAITERRA www.kaiterra.com
What's the requirement for Wi-Fi on the Sensedge?
The Wi-Fi has to be 2.4GHz. 5GHz Wi-Fi is not supported.
The following Wi-Fi standards are supported: 802.11b/g/n or Wi-Fi 1/3/4 with the new
naming.
Security standards including the latest 64/128 WEP, WPA-PSK, WPA2-PSK, WPA and
WPA2 Personal are supported.
WPA2 Enterprise is NOT supported.
WPA/WPA2 are fulfilling the most part of 802.11i. The latest version of WPA3 is NOT
supported.
Internal PKI (Public Key Infrastructure) is NOT supported.
Does the Sensedge support Modbus?
There are two types of Modbus protocol, Modbus/TCP and Modbus/RTU. The
Sensedge supports Modbus/TCP via the Ethernet port. No external hardware or
dongles/adapters are needed for this.
To support Modbus/RTU, an adapter* can be used to translate from Modbus/TCP to
Modbus/RTU. On the hardware layer, this adapter converts from Ethernet to RS485.
This means that RS485 cabling will be plugged into the adapter, which in turn is
plugged into the Sensedge's Ethernet port.
When using the adapter for RS485, the Sensedge thinks it's running Modbus/TCP,
and the conversion to Modbus/RTU is happening solely on the adapter.
Page ! 5