Dodge RAM 2500 2022 Owner's Manual page 198

194 STARTING AND OPERATING
Adaptive Cruise Control (ACC) Operation
The buttons on the right side of the steering wheel
operate the ACC system.
Adaptive Cruise Control Buttons
1 — Adaptive Cruise Control On/Off Button
2 — Fixed Speed Cruise Control On/Off Button
3 — CANCEL
4 — Distance Button
5 — RES (+)
6 — SET (-)
Adaptive Cruise Control (ACC) Menu
The instrument cluster display will show the
current ACC system settings. The information it
displays depends on ACC system status.
Push the ACC on/off button until one of the
following appears in the instrument cluster display:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read
"Adaptive Cruise Control Off."
Adaptive Cruise Control Ready
When ACC is activated, but the vehicle speed
setting has not been selected, the display will read
"Adaptive Cruise Control Ready."
Adaptive Cruise Control Set
When the RES (+) or the SET(-) button is pushed,
the display will read "ACC SET."
When ACC is set, the set speed will show in the
instrument cluster display.
The ACC screen may display once again if any of
the following ACC activity occurs:
System Cancel

Driver Override

System Off

ACC Proximity Warning

ACC Unavailable Warning

The instrument cluster display will return to the last
display selected after five seconds of no ACC
display activity.
Activating Adaptive Cruise Control (ACC)
The minimum set speed for the ACC system is
20 mph (32 km/h).
When the system is turned on and in the ready
state, the instrument cluster display will read "ACC
Ready."
When the system is off, the instrument cluster
display will read "Adaptive Cruise Control (ACC)
Off."
NOTE:
You cannot engage ACC under the following condi-
tions:
When in 4WD Low

When brakes are applied

When the parking brake is applied

When the automatic transmission is in PARK,

REVERSE or NEUTRAL
When the vehicle speed is below the minimum

speed range
When the brakes are overheated

When the driver's door is open at low speeds

When the driver's seat belt is unbuckled at low

speed
When Electronic Stability Control (ESC) Full Off

mode is active