JVC XV-S332SL Instructions Manual page 12

Preliminary knowledge
Display window
1 Disc indicator
Indicates the type of the disc set in the tray. When a DVD
VIDEO disc is set, "DVD" lights up. When a SVCD or Video
CD disc is set, "VCD" lights up. When an Audio CD or
MP3 CD disc is set, "CD" lights up.
2 Group/title/track/chapter indicators
Displays group/title/track, or chapter number.
3 Repeat mode indicators
The appropriate indicator illuminates according to the
current repeat mode.
Rear panel
1
DIGITAL OUT
PCM / STREAM
COAXIAL
1 DIGITAL OUT jack (COAXIAL) (15)
Outputs digital audio signals. You must select the type
correctly according to the external device connected to
via the Preference display.
2 COMPONENT VIDEO OUT jacks (Y/P
Output component video signals.
To enable these jacks, select VIDEO OUT SELECT
(COMPONENT/S-VIDEO) switch to "COMPONENT".
3 S-VIDEO OUT jack (13)
Outputs a S-video signal.
To enable this jack, select VIDEO OUT SELECT
(COMPONENT/S-VIDEO) switch to "S-VIDEO AND VIDEO".
4 VIDEO OUT jack (13)
Outputs a composite video signal.
To enable this jack, select VIDEO OUT SELECT
(COMPONENT/S-VIDEO) switch to "S-VIDEO AND VIDEO".
5 AUDIO OUT jacks (LEFT/RIGHT) (13, 14)
Outputs stereo analog audio signals.
8
1 2
VCDVD GROUP TITLE TRACK CHAP
PROGRAM
RANDOM
4
2
VIDEO OUT
COMPONENT
Y P P
B R
RIGHT LEFT
S-VIDEO VIDEO
AUDIO OUT
3 4 5
/P ) (14)
B R
3
A - B
1
5
4 PROGRAM/RANDOM indicators
The appropriate indicator illuminates while the unit is in
the Program or Random playback mode.
5 Multi-information window
Displays the current group/title/track/chapter number(s),
time and status information.
VIDEO OUT SELECT
S-VIDEO COMPONENT
AND
VIDEO
NTSC PAL
6 7
6 VIDEO OUT SELECT switch (COMPONENT/S-VIDEO) (13)
Select "COMPONENT" or "S-VIDEO AND VIDEO".
Note that you must change the switch position while
the unit is stopped or while the unit power is off with the
DVD removed.
Otherwise, the changed setting will not be effective.
7 VIDEO OUT SELECT switch (NTSC/PAL) (13)
Select "NTSC" or "PAL" to match the color system of
your TV.
Note that you must change the switch position while
the unit power is off (on standby).
Otherwise, the changed setting will not be effective.
8 AV COMPU LINK jacks
These jacks are provided for use in the future. They are
currently not used.
9
AC IN connector (16)
Connects to the wall outlet using the supplied AC power cord.
0 Region Code label (12)
Shows Region Code number.
AC IN
AV COMPU LINK
8 9
4
0