Table of Contents
Advertisement
AUTOMATIC OPERATION
The device will automatically determine the mode of operation, HEAT or COOL depending on the current room
temperature. The selected mode of operation will change when the room temperature varies.
F.Wash
Right/Left
Sleep
Silent
Right/Left
F.Wash
Sleep
Silent
Press the MODE selector button so that the display indicates
the
(AUTO) mode of operation.
When AUTO has been selected, the device will automatically
determine the mode of operation, HEAT or COOL
1
depending on the current room temperature.
If the mode automatically selected by the unit is not
satisfactory, manually change of the mode setting is
recommended (HEAT, DEHUMIDIFY, COOL or FAN).
Set the desired FAN SPEED with the
2
(the display indicates the setting).
(AUTO)
Set the desired room temperature with the TEMPERATURE
button (the display indicates the setting).
3
The temperature setting and the actual room temperature
may vary depending on conditions.
Temperature range can be set between 16°C and 32°C.
Press the
(ON/OFF) button.
START
Operation starts with a beep.
STOP
Press the button again to stop operation.
As the settings are stored in the memory of the remote control,
you only have to press the
Press the
(FAN SPEED) button to select AUTO, HIGH, MED,
LOW or SILENT.
- 8 -
(FAN SPEED) button
(HIGH)
(SILENT)
(LOW)
(ON/OFF) button next time.
(MED)
Advertisement
Table of Contents
