Cleaning And Maintenance - universalblue TWISTY 800/0B User Manual

cover on the bowl and insert the the main body into the hole until
it is tight and locked.
• Plug in the appliance and press the switch to start the chopper.
While using the chopper, place one hand on the main body and
hold the chopper with the other hand.
• The chopper must be used in cycles of 30 second and stopped
for 2 minutes. The appliance cannot be used for more than 3
cycles in a row. If necessary, allow the appliance to cool down
before using it again.
• The chopper accessory is designed to work with quantities of
less than 300 g of food.
• After using the appliance, unplug it and remove the main body.
• Open the cover's chopper and remove the blades from the bowl.
Please, take care when removing the blades as they are
sharp.

4. CLEANING AND MAINTENANCE

This product does not require much maintenance.
• To clean the appliance, disconnect it from the power supply
and remove the foot from the blender.
• Clean the main body with a damp cloth. Do not immerse the
body in water or liquid as the motor could be damaged.
• To clean the leg and other accessories, immerse the parts in
warm soapy water and wipe with a cloth or brush.
Caution: The blades are very sharp, try to clean them with a
cloth to avoid accidents and never touch the blades directly
with your hands.
• Dry all parts completely before storing the appliance.
• Never use aggressive cleaning agents to clean the appliance.
24