D I G I T A L I/O Connection 2 - Kenwood GP-610A Instruction Manual

GP-610A
GP-610A
OUTPUT A
D/A output -
OUTPUT B
D/A output -
OUTPUT C
I)/A outpul
Note: For connect ing the CV/CC e x t e r n a l control without OP-13, connect the
external r e s i s t o r and set the S
"control of output voltage/current by an e x t e r n a l voltage" of the PA
s e r i e s instruct ion manual.
4) D i g i t a l I/O connect ion
The d i g i t a l 1/0 connector (7-pin DIN) of t h i s component inputs a pair of
interrupt signals and output the OUTPUT ON/OFF control s i g n a l .
I f an interrupt occurs, s e r v i c e request (SRQ) i s generated for the GP-IB bus.
Also, the status byte i s sent corresponding to s e r i a l p o l l i n g .
CONTROL A
CONTROL B
Red
Black
Red
Black
Red
Black
/ S switch to REMOTE as described in
z 4
OUTPUT ON/OFF
Interrupt
signal input signal output
Pin 2, 3, 6, 7
Pin 2, 3, 6, 7
- 2 0 -
PA power supply
Si REMOTE
Constant vol I age setting
S2 REMOTE
Constant current setting
1, 4
1, 4