Kodak SLIDE N SCAN User Manual page 22

If the SD Card you use is not compatible, you will need to format it using your
computer.
1. Use the Type-C USB Cable to connect the scanner to your computer's USB port.
2. Make sure your scanner and computer are both powered on.
3. From the scanner's Home Page, select the USB Upload
4. Press OK/Scan
5. Find the Removable Disk on your computer (usually E: or F:) and right click on it.
6. Select "Format."
SETTING THE DATE AND TIME
Setting the Date and Time allows you to manually label the image with the date the
photo was taken or scanned. This setting is not a running calendar or clock.
You can set the Date and Time of an image before scanning it. The Date and Time
will not be printed on the scanned image, but it will be stored in the image's
electronic file.
To set the Date and Time:
1. Go to the scanner's Home Page, and use the Arrow buttons select the Date and
Time Icon. Press OK/Scan
2. You will see a Date and Time adjustment table.
EN | 22
button to complete the connection.
button to confirm.
12 /01 /2019
2:55 PM
Icon