Kodak SLIDE N SCAN User Manual page 14

• Remember you do not need to remove the adapter if you plan to scan multiple
film of the same size. And 135, 110, or 126 slides can all be used with the 135
Slide Holder.
To scan transparent slides:
1. Insert the 135 Slide Holder/Main Holder into the Film/Slide Holder Slot, using the
triangular arrow marks on the holder and the scanner for reference until it stops.
2. Insert slides one at a time into the opening in the slide holder. The slides will
push each other through. You can center the slide by manually adjusting it to
the left or right.
3. With the slide centered in place, make color and brightness adjustments as
necessary. Refer to "Adjusting Image Brightness and Color" section for
further instructions for this step.
4. When the image is in place on the LCD screen, you can press the OK/Scan
button to scan.
5. The image will then automatically be saved on the SD card.
To scan 135, 110, and 126 negatives:
1. Open the 135 Slide Holder/Main Holder, and insert the appropriate Film Adapter
for the size of your negatives.
2. Make sure the four pins on the adapter are fully inserted into the four holes on
the Slide Holder. The adapter should be completely flat.
EN | 14