Kodak SLIDE N SCAN User Manual page 15

3. Close the 135 Slide Holder/Main Holder until it clicks shut. If it doesn't close
properly, do not force it shut. Simply, reposition the adapter and try again.
4. Insert the Film Adapter and Slide Holder into the Film/Slide Holder Slot, using
the triangular arrow marks on the holder and the scanner for reference.
5. Insert film one at a time into the opening in the Film Adapter. The negatives will
push each other through. You can center the image by manually adjusting it to
the left or right.
6. When the image is in place on the LCD screen, you can press the OK/Scan
button to scan.
7. The image will then automatically be saved on the SD card.
NOTE: Make sure the side of the negative upon which the words are printed
is oriented at the top.
15 | EN