Setting The Clock; Entering Titles - Clarion DXZ645MP Owner's Manual

Operations Common to Each Mode

Setting the clock

1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select
"CLOCK ".
3. Press the [ ] button.
4. Press the [a] or [d] button to select the
hour or the minute.
5. Turn the [ROTARY] knob clockwise or coun-
terclockwise to set the correct time.
∗ The clock is displayed in 12-hour format.
6. Press the [ ] button to store the time into
memory.
7. Press the [T] button to return to the previous
mode.
Note:
• You cannot set the clock when it is displayed with
only the ignition on. If you drain or remove the
car's battery or take out this unit, the clock is reset.
While setting the clock, if another button or opera-
tion is selected, the clock set mode is canceled.
Setting the button illumination
Press the [COLOR] button to select a color type.
Each time you press the [COLOR] button, the
type changes in the following order:
COLOR SCAN ➜ RED ➜ MANDARIN ➜
ORANGE ➜ AMBER ➜ YELLOW ➜
G-YELLOW ➜ LIME ➜ GREEN ➜ D-GREEN
➜ USER ➜ COLOR SCAN...
●Setting COLOR SCAN mode
As selecting "COLOR SCAN", the color auto-
matically changes.
∗ The factory default setting is "COLOR SCAN".
∗ After 3 second the color changes to the other.
●Setting USER mode
The factory default setting is "R>8 G>8" (R: red,
G: green).
As selecting "USER", press and hold the
[COLOR] button for 1 second or longer "R>8
G>8" appears in the display.
1. Press the [a] or [d] button to move the
cursor.
2. Turn the [ROTARY] knob clockwise or coun-
terclockwise to select from 0 to 8.
3. Press and hold the [
onds or longer to store the color in memory
and cancel setting mode.
24
DXZ645MP
] button for 2 sec-
COLOR
RED
MANDARIN
ORANGE
AMBER
YELLOW
G-YELLOW
LIME
GREEN
D-GREEN

Entering titles

Titles up to 10 characters long can be stored in
memory and displayed for CD, CD changer and
TV stations. The number of titles that can be en-
tered for each mode are as follows.
Mode
CD mode
TV mode
Tuner mode
CD changer mode
DCZ625 connected
CDC655Tz connected
CDC1255z connected
1. Press the [FNC] button to select the mode
you want to enter a title (TUNER, CD, CD
changer or TV).
2. Select and play a CD in the CD changer or
tune in to a TV station or TUNER for which
you want to enter the title.
3. Press the [D] button and display the main.
4. Press the [T] button.
5. Press the [a] or [d] button to move the cursor.
6. Press the [D] button to select a character.
Each time you press the [D] button, the char-
acter changes in the following order:
Capital letters ➜ Small letters ➜ Numbers
and Symbols ➜ Umlaut ➜ Capital letters...
7. Turn the [ROTARY] knob to select the de-
sired character.
8. Repeat steps 5 to 7 to enter up to 10 charac-
ters for the title.
9. Press and hold the [
onds or longer to store the title into memory
and cancel title input mode.
R G
8 0
8 1
8 2
8 5
8 8
6 8
4 8
2 8
0 8
Number of titles
50 titles
20 titles
30 titles
Number of titles
100 titles
100 titles
50 titles
] button for 2 sec-