Appendix; Testing The Sensor; Features Available When Using The [Home Network] App; Accessing The User's Guide - Panasonic KX-HNS103C Installation Manual

Testing the sensor

You can check the sensor's LED
indicator and test the performance of
the sensor.
1
Remove the main unit cover.
2
Press M
3
Touch the probes of the probe unit
to water.
4
Confirm that the LED indicator
lights in red.
5
Press M
Features available
when using the
[Home Network] app
Some of the sensor's features that are
available when using the [Home
Network] app are listed below. For
more information, refer to the User's
Guide (page 19).
– Alarm system
You can use the app to arm and
disarm the alarm system, confirm
the current status of the sensor, and
view a log of previous events.
– Sensor integration
You can configure the sensor to
trigger other system events, such as
camera recording, turning on an
electric device (such as a lamp), etc.
(Appropriate device required.)
– Telephone alert
You can configure the system to call
a preprogrammed phone number
when the sensor is triggered.
For assistance, visit www.panasonic.ca/english/support
HNS103C_(en-en)_0224_ver.020.pdf
N.
N again.
19
Accessing the User's
Guide
The User's Guide is a collection of
online documentation that helps you
get the most out of the [Home
Network] app.
1
iPhone/iPad
Tap in the app's home screen.
™
Android devices
Tap or press your mobile
device's menu button in the app's
home screen.
2
Tap [User's Guide].
Note:
® ®
R Microsoft Windows
®
Explorer 8 and earlier versions are
not supported.
R Android 4.1 or later versions are
recommended.
R You can also access the User's
Guide at the web page listed below.
www.panasonic.net/pcc/support/tel/
homenetwork/manual/

Appendix

Internet
19
2015/02/24 15:14:55