Panasonic KX-HNS103C Installation Manual page 18

Setup
Removing from the wall
n Removing from the wall mounting adaptors
1
Insert a flat screwdriver into the notches on the wall mounting adaptors, and
carefully pry away the main unit and probe unit.
2
Remove the screws that secure the wall mounting adaptors to the wall.
n Removing when secured with double-sided tape only
1
Tie a piece of thread to two sticks, screwdrivers, etc.
2
Pull the thread tight and use it to cut the double-sided tape, and then remove
any excess tape.
Excess tape
1
18
HNS103C_(en-en)_0224_ver.020.pdf
For assistance, visit www.panasonic.ca/english/support
18
1
2015/02/24 15:14:55