Advertisement
OPERATOR'S MANUAL
• Wear proper safety equipment and clothing, safety glasses/goggles.
• Hot automotive fluids can burn and injure eyes and body.
• Opening a hot system can cause these fluids to be forcibly sprayed in all directions.
• Use care to position the oil drain under the anticiapted fluid stream and adjust as necessary
until all fluids are collected.
• Be aware of natural wind, fans or other factors that may alter the fluid stream that may cause
injury or contamination of the surroundings.
• Use motor oil is flammable. Keep away from flames, sparks, and other sources fo ignition.
• DO NOT exceed 10 PSI (0.7 bar) supply pressure
U.S. Environmental Regulations
• Certain automotive fluids are considered to be compatible for recycling used oil per the US
Environmental Agency (EPA). Other types of fluids my not be mixed with used motor oil and
must be handled as separately. See definitions below:
Used OIl is:
• Synthetic Oil
• Engine Oil
• Transmission Oil
• Brake Fluid
• Hydraulic Oils Cutting / Metal-working
Oils
• Tank should be in good condition with no visible leaks. Repair leaks and clean up spills and
properly dispose of waste material.
• Close all valves when the oil drain is not being filled or emptied.
Product Specifications:
Tank Type
Tank Capacity
Funnel Type
Funnel Inside Diameter
Safety & Warning Instructions
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT
It is responsibility of the employer to place this information in the hands of the operator.
Steel, portable
25 gallons, (95 liters)
Steel, reinforced center mount
16 inch (406 mm)
Keep for future reference.
NOT Used OIl:
• Antifreeze
• Gasoline
• Kerosene
• Petroleum distillates and Solvents
• Vegetable or Animal Oil
Drain Pipe Fitting
Height
Weight (Empty)
Weight (Full)
2.
JDI-25HDC
3/4 inch NPT
47 to 70 inch (119 to 178 cm)
55 lbs. (25 kg) w/out hose
240 lbs. (109 kg)
Advertisement
