Patriot Lighting 356-2825 Assembly And Installation Instructions Manual

Patriot Lighting 356-2825 Assembly And Installation Instructions Manual

Advertisement

Quick Links

In case of damaged or missing parts, please call toll-free
at 1-800-887-6326
Contents of Spare Parts:
Assembly Kit
(1 SET)
(4807MM)
Decorative Finial
(1 PC)
(4807FF)
5-YEAR LIMITED WARRANTY:
This Patriot Lighting fixture carries a limited warranty against defects in material
or workmanship. If the Patriot Lighting product fails at any time within five (5)
years after the original date of sale due to defects in material or workmanship,
return the product to Menards with the original sales receipt. At its discretion,
Patriot Lighting will replace the defective fixture with the same or similar fixture or
issue a refund. This warranty and any implied warranty (including but not limited
to any implied warranty of merchantability or fitness for a particular purpose) does
not cover glass globes, light bulbs and other expendable items. This warranty
excludes coverage of finish or color against tarnishing, flaking, and discoloration.
If the original purchaser ceases to own the Patriot Lighting product this warranty
and any implied warranty will be void. This warranty does not cover damage
caused by misuse or abuse, including but not limited to improper installation,
improper usage, accident, negligence, unauthorized repair, unauthorized
modifications, or unauthorized maintenance of the fixture. This warranty does not
include reimbursement for inconvenience, installation, setup time, returned
shipping charges or defects, losses, labor, injuries to personal property.
This warranty gives the consumer specific legal rights, and the consumer may
have other rights which vary from state to state. The seller's employees are not
qualified to advise on the use of the fixture. Any oral representations made will
not be binding on seller or its employees.
For questions regarding this product, call toll-free at 1-800-887-6326.
Back
Decorative Cap Nut
(4 PCS)
(4805CT)
Decorative Finial
(1 PC)
(4805FF)
Glass Panel
(5 PCS)
(9473CS)
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
356-2825
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING
THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding
requirements.
2. Customer Service: 1-800-887-6326 (weekdays 9 a.m. – 5 p.m. CST)
3. READ AND SAVE THESE INSTRUCTIONS.
CAUTION:
Read and understand all Safety and Operating instructions in this
manual before attempting to assemble or use this product.
Cover
130724

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 356-2825 and is the answer not in the manual?

Questions and answers

Summary of Contents for Patriot Lighting 356-2825

  • Page 1 This Patriot Lighting fixture carries a limited warranty against defects in material or workmanship. If the Patriot Lighting product fails at any time within five (5) years after the original date of sale due to defects in material or workmanship, return the product to Menards with the original sales receipt.
  • Page 2 • Estimated Assembly Time: 30 minutes PARTS LIST • Tools required for Assembly: #2 Phillips screwdriver (not included) Pliers or adjustable wrench (not included) Fig.1 Fig.2 Part Description Quantity Light fixture Motion detector Cross-bar Decorative cap nuts Junction box mounting screws Wire nuts Decorative...
  • Page 3 IMPORTANT SAFETY INSTRUCTIONS ASSEMBLY INSTRUCTIONS Understanding Hazard Signal Words: TURN OFF POWER. Turn OFF power to circuit at main circuit breaker or fuse box. WARNING indicates a potentially hazardous situation that, if CAUTION not avoided, may result in death or serious injury. Do not rely on wall switch alone to turn off...
  • Page 4 OPERATING INSTRUCTIONS Junction box wire may be red and/or have a copper conductor. The White junction box wire may be square and/or have a silver conductor. Make sure power is turned on at circuit breaker and wall Silicone switch is in the ON position. Wall switch must remain in MOUNT FIXTURE.
  • Page 5 2.TIME/TEST SECURITY mode the next night. The MANUAL OVERRIDE The TIME/TEST knob is used to switch into the TEST mode and to feature only works at night in SECURITY mode or when in set the ON time that the lamp will stay on after motion is detected TEST mode.
  • Page 6 MANUAL OVERRIDE TROUBLE SHOOTING Use below chart for troubleshooting your security light You can also turn the light on manually from the wall switch by flipping the wall switch off for 1 to 3 seconds and then back on. The light will stay PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION...

Table of Contents